Controller

LEADTEC'S DUAL CHANNEL CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows measured value, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received compliments from our business partners. Every Leadtec controller has an output test function which allows user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply and Bluetooth technology is available on request.

Specification
  • Power Supply : 85-265VAC, IP65
  • Internal data logger for 500 000 data
  • Range : 0.00 to 20.00ppm / 0000-2.000ppm
  • Temperature : -10.0 to +130.0'C (Pt1000/NTC10K)
  • 2 x set-point relays & 1 multi-function relay
  • 2 x 4-20mA output (ppm and Temperature)
  • RS485 Modbus RTU
  • CE certified

LEADTEC’s PH & ORP CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows the PH or ORP, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received well compliments from our business partners. Every Leadtec controller has an output test function which allows user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply and Bluetooth technology is available on request.


Specification
  • Power Supply : 85-265VAC, IP65.
  • Internal data logger for 500 000 data.
  • Range : 0.0 to 400.0%/0.00 to 40.00ppm/0.0-200.0ppb
  • Temperature : -10.0 to +130.0'C (Pt1000/NTC10K/NTC22K)
  • 4 x set-point relays
  • 2 x 4-20mA output(pH and DO)
  • RS485 Modbus RTU
  • CE certified

LEADTEC’s CONDUCTIVITY | RESISTIVITY CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows measured value, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received well compliments from our business partners. Every Leadtec controller has an output test function which allows user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply and Bluetooth technology is available on request.


Specification
  • Power Supply : 85-265VAC, IP65.
  • Internal data logger for 500 000 data.
  • Range : 0.00 to 2000mS / 0.00 to 20.00M-ohm
  • Temperature : -10.0 to +130.0 °C (Pt1000/NTC30K)
  • 2 x set-point relays & 1 x multi-function relay
  • 2 x 4-20mA output (EC and Temperature)
  • RS485 Modbus RTU
  • CE certified

LEADTEC’s TOTAL DISSOLVED SOLID (TDS) CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows measured value, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received well compliments from our business partners. Every Leadtec controller has an output test function which allows user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply and Bluetooth technology is available on request.


Specification
  • Power Supply : 85-265VAC, IP65.
  • Internal data logger for 500 000 data.
  • Range : 0.00 to 2000mS / 0.00 to 20.00M-ohm
  • Temperature : -10.0 to +130.0 °C (Pt1000/NTC30K)
  • 2 x set-point relays & 1 x multi-function relay
  • 2 x 4-20mA output (EC and Temperature)
  • RS485 Modbus RTU
  • CE certified

LEADTEC’s DISSOLVED OXYGEN CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows the concentration of dissolved oxygen, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received well compliments from our business partners. Every Leadtec controller has an output test function which allows user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply is available on request.

Specification
  • Power Supply : 85-265VAC, IP65.
  • Internal data logger for 500 000 data.
  • Range : 0.0 to 400.0%/0.00 to 40.00ppm/0.0-200.0ppb
  • Temperature : -10.0 to +130.0 °C (Pt1000/NTC22K)
  • 2 x 4-20mA output (DO and Temperature)
  • 2 x 4-20mA output (ppm and Temperature)
  • RS485 Modbus RTU
  • CE certified

LEADTEC'S TURBIDITY CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows the turbidity or suspended solid measurement, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received well compliments from our business partners. Every Leadtec controller has an output test function which allow user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply and Bluetooth technology is available on request.

Specification
  • Power Supply : 85-265VAC, IP65.
  • Internal data logger for 500 000 data.
  • Range : 0.0 to 100.0 NTU / 0.0 to 4000.0 NTU / 0 to 50 g/L
  • Temperature : -10.0 to +130.0'C (NTC)
  • 2 x set-point relays & 1 x multi-function relay
  • 2 x 4-20mA output (EC and Temperature)
  • RS485 Modbus RTU
  • CE certified

LEADTEC’s FREE CHLORINE CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows the free chlorine measurement, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received well compliments from our business partners. Every Leadtec controller has an output test function which allows user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply and Bluetooth technology is available on request.

Specification
  • Power Supply : 85-265VAC, IP65
  • Internal data logger for 500 000 data
  • Range : 0.00 to 20.00ppm / 0000-2.000ppm
  • Temperature : -10.0 to +130.0'C (Pt1000/NTC10K)
  • 2 x set-point relays & 1 multi-function relay
  • 2 x 4-20mA output (ppm and Temperature)
  • RS485 Modbus RTU
  • CE certified

LEADTEC'S SUSPENDED SOLIDS CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows the turbidity or suspended solid measurement, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received well compliments from our business partners. Every Leadtec controller has an output test function which allow user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply and Bluetooth technology is available on request.

Specification
  • Power Supply : 85-265VAC, IP65.
  • Internal data logger for 500 000 data.
  • Range : 0.0 to 100.0 NTU / 0.0 to 4000.0 NTU / 0 to 50 g/L
  • Temperature : -10.0 to +130.0'C (NTC)
  • 2 x set-point relays & 1 x multi-function relay
  • 2 x 4-20mA output (EC and Temperature)
  • RS485 Modbus RTU
  • CE certified

LEADTEC'S SLUDGE BLANKET CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows the turbidity or suspended solid measurement, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received well compliments from our business partners. Every Leadtec controller has an output test function which allow user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply and Bluetooth technology is available on request.

Specification
  • Power Supply : 85-265VAC, IP65.
  • Internal data logger for 500 000 data.
  • Range : 0.0 to 100.0 NTU / 0.0 to 4000.0 NTU / 0 to 50 g/L
  • Temperature : -10.0 to +130.0'C (NTC)
  • 2 x set-point relays & 1 x multi-function relay
  • 2 x 4-20mA output (EC and Temperature)
  • RS485 Modbus RTU
  • CE certified

LEADTEC’s OZONE CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows the free chlorine measurement, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received well compliments from our business partners. Every Leadtec controller has an output test function which allows user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply and Bluetooth technology is available on request.

Specification
  • Power Supply : 85-265VAC, IP65
  • Internal data logger for 500 000 data
  • Range : 0.00 to 20.00ppm / 0000-2.000ppm
  • Temperature : -10.0 to +130.0'C (Pt1000/NTC10K)
  • 2 x set-point relays & 1 multi-function relay
  • 2 x 4-20mA output (ppm and Temperature)
  • RS485 Modbus RTU
  • CE certified

LEADTEC’s SALINITY CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows measured value, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received well compliments from our business partners. Every Leadtec controller has an output test function which allows user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply and Bluetooth technology is available on request.

Specification
  • Power Supply : 85-265VAC, IP65.
  • Internal data logger for 500 000 data.
  • Range : 0.00 to 2000mS / 0.00 to 20.00M-ohm
  • Temperature : -10.0 to +130.0 °C (Pt1000/NTC30K)
  • 2 x set-point relays & 1 x multi-function relay
  • 2 x 4-20mA output (EC and Temperature)
  • RS485 Modbus RTU
  • CE certified

LEADTEC’s ION SELECTIVE OR ISE CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows the concentration of ions, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received well compliments from our business partners. Every Leadtec controller has an output test function which allows user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply and Bluetooth technology is available on request.

Specification
  • Power Supply : 85-265VAC, IP65.
  • Internal data logger for 500 000 data.
  • Range : 0.00 to 20,000 ppm
  • Temperature : -10.0 to +130.0'C (Pt1000/NTC10K)
  • 2 x set-point relays & 1 x multi-function relay
  • 2 x 4-20mA output (PPM and Temperature)
  • RS485 Modbus RTU
  • CE certified

LEADTEC'S AMMONIUM | NITRATE CONTROLLER


Available in two series and has multiple mounting options including wall, panel, or pipe mount. The LCD display shows the concentration of Ammonium & Nitrate, temperature, date, value of current output and the relay activation signal simultaneously. The setting of the controller and the calibration of the measured value can be done easily with a friendly interface which received well compliments from our business partners. Every Leadtec controller has an output test function which allows user to simulate current output and activate relay for various purpose like troubleshooting, commissioning and etc. 24VDC as power supply and Bluetooth technology is available on request.

Specification
  • Power Supply : 85-265VAC, IP65.
  • Internal data logger for 500 000 data.
  • Range : Ammonium, NH4+ : 0.0 to 100.0ppm Nitrate, NO3 : 0.0 to 100.0ppm K+ : 0.0 to 1000.0ppm Chloride, CL- : 0.0 to 5000.0ppm
  • Temperature : 0.0 to +50.0°C (NTC)
  • 2 x set-point relays & 1 x multi-function relay
  • 2 x 4-20mA output (PPM and Temperature)
  • RS485 Modbus RTU
  • CE certified